Clean Out Drain
Getting a clean out drain in Toronto is the number one thing to do when you notice water accumulating in your sinks, toilets or drainage. These are all common plumbing problems that can create unpleasant odors as well as unsightly stains and clogs. When a sink, toilet, or drain becomes clogged, it often results in an overflow, which means excess water then enters the sewage system. When this happens, you may have to call a plumber and clean out the drain or sewer yourself.
The first step you should take is to turn off the main water supply in the home. You will need to turn off the power to the main water valve, but you do not want to cut off the rest of the water. Once you have the main water shut off, you should open up the main sewer valve and then the main storm water drain valve. After opening these valves, you should then close them up, making sure they are fully closed.
Once you have started the job, it is important to work quickly. It can be dangerous to attempt to clean out a heavily clogged drain if the water level is not brought down to an acceptable level. You will have to locate the problem areas, which may include bent pipes, blockages in drains, or any other problems. The main goal in these cleanups is to make the work go as smoothly as possible without creating any more damage. To locate the problem areas, use a flashlight with a bright light, and look carefully for bends or tears in pipes. This will help you identify problem areas and get them taken care of before they become larger and more expensive to fix.
How to Clean Out Drain Plumbers Use
When the flashlight cannot see the problem areas, you should try using a handheld drain cleaner, which has suction that will allow you to clean out the pipes from the outside. This tool is available at most home improvement stores. After you have used the drain cleaner, rinse the pipe with cold water to remove all the debris that is stuck inside. If you do not have access to a clean outside pipe, you may need to rent a sewer snake to reach the root of the blockage, which will require digging up the soil around the house.
When you have successfully cleaned the problem areas, you can move on to the problem areas further away from the house. The sewer exit point is generally located at the service entrance of the house. The location of the service entrance is important, because you do not want your sewage trap filled with debris as you are trying to clean it out. If this were to happen, you would end up having to dig the pipes again to remove all the accumulated gunk. You may want to have a plumber re-route the plumbing so as to minimize the amount of damage caused by the backed up pipes.
Once you have completed the clean out, test the pipes near the drain entrance for leaks. If there are any, these leaks will need to be sealed. This is a very simple but important step to take, because if left unfixed, a possible flooding situation will occur. If you have any doubts about the clean out being sufficient, you may consider calling a professional plumbing contractor to have the problem fixed.