However, like other famous consoles, Nintendo’s creation seems to have some flaws and many consumers are looking for solutions to fix Wii problems. If you have this machine and want to know how to repair it properly, here are some helpful suggestions you can try.
Dealing with Wii error codes
Many of the problems experienced by Wii users come in the forms of error codes, rather than hardware problems. Wii has several common error codes, and here are the proper ways to deal with them.
* Error Codes 110210, 110212, 110211, and 110213 – These show signs of a hardware problem with your Wii system. They often appear when your Wii is upgraded to 2.0U. You should take your machine to the nearest Nintendo service center, if these codes appear.
* Error code 51130: When this appears on the screen, try pressing the “retry” button several times. Keep trying and eventually your console will start working properly again.
* Error code 32002 and 52030: When they appear on the screen, the problem lies with the Wii router. Solve this by changing the router channel from 1 to 11. If nothing happens, change the security type from WEP to WPA. You can also disable toe safety temporarily. Check if this tactic helps.
* Error code 220602 – Another router issue that many users run into. Try moving the Wii closer to the wireless router. If this fails, change the primary and secondary DNS servers on the console. That should return it to normal.
Wii disc read error
Another common dilemma Wii users encounter when using their machine are errors that indicate an unreadable disc. The screen will display “Disc could not be read” or “Disc could not be read” signs. This often appears when the Wii has been shaken severely, as if it were dropped. To fix this, unplug the power cord from the console and let it sit for a few minutes. Plug it back in and try again. Many users find this effective, but if it doesn’t work for you, you may need to repair your Wii.
Wii Remote Problems
Aside from error codes and disc error, another factor that Wii users complain about is the Wii Remote. Despite its revolutionary and impressive functions, the remote control is also one of the parts that often needs repair. Here are some ways to solve the Wii Remote dilemma.
* Check the sensor bar and make sure it is inserted and firmly attached to the rear area of the Wii.
* Place the Sensor Bar below or on top of your TV, depending on where you indicated it should be during setup.
* Change the batteries in the remote control. Sometimes you have trouble with your remote before it shows that the batteries need to be changed. If your Wii is fixed, it will notify you immediately when the batteries are running low.
* Wireless computer keyboards, cordless phones, and other types of radio-based devices can cause your Wii Remote to stop working properly. You must also be careful of radio interference.
* When using the remote control, make sure you are at least one meter, but not more than 10 feet, from it.
* Remove everything between the console, the sensor bar and the Wii Remote.
* Do not use the remote control in sunlight or near a candle or fireplace. Any interference from an infrared light source can also cause problems.
The Nintendo Wii is an amazing electronic device, but not when it’s not working properly. Although it’s best to take your Wii to a service center when you encounter problems, trying these repair tactics yourself won’t hurt. Hopefully, they will make your console useful and entertaining again.
